Hi, CDA WC140 IN dishwasher on draining, I have cleaned filter (& washer arms whilst I was there), I have tried to flush pipes through with water as I have done before but this time it will not drain away. All 3 (salt, rinse aid & end) lights were flashing & the warning beeping sound was there. Can you help, cheers, Andy.
CDA are a manufacturer of washing machines and kitchen appliances owned by the Polish company Amica Group PLC, which operates in 50 countries worldwide. CDA are located in Nottinghamshire (UK), the company was established in 1991. It belongs to the Amica Group since 2015.
Looking for reliable information on washer repair or dishwasher repair? This is exactly what you’ll find below. No matter what the issue is (you dishwasher doesn’t work properly, your washer is not spinning or is experiencing other malfunction), the tables below will give you useful troubleshooting advice. The first column lists the most common washer and dishwasher problems (for instance, a washer wont spin), and next to it you will find the explanation and possible solutions.
- The fully integrated dishwasher from Baumatic is designed to make your life easier. With 5 fundamental wash programmes, a delay timer and a generous 12 place setting capacity, this dishwasher will work away in the background to give you squeaky clean dishes when you need them.
- View and Download CDA Wc140in installation & use manual online. Integrated Dishwasher. Wc140in dishwasher pdf manual download. Also for: Wc141.
- CDA Integrated Dishwasher WC140IN Numerous faults since installation, some of which have been repeat faults - overheating - warning lights - salt sensor not working - complete failure to turn on CDA engineers cost £99 a time to come out. They're useless and criticise each others work. CDA customer service is non existent.
- CDA Appliances Built for your life.
CDA WC460, CDA WC140 dishwasher troubleshooting
WC460 is an integrated dishwasher produced by the UK-based brand of washing machines and kitchen appliances CDA. This is a compact model belonging to the Slimline series. There is a choice of five programs, from Soak to Ultra Clean. They differ in terms of a cycle length as well as temperature, which may vary from 45C to 70C. The Ultra Clean mode terminates with an anti-bacteria rinse that provides the most reliable result.
The CDA WC140 dishwasher belongs to the range of integrated dishwashers made by the CDA brand founded in 1991. Basically, the model provides a choice of five programs. Sometimes just a Prewash or a Quick wash is enough, but in case the degree of soil is rather high, an Intensive mode is more appropriate. There is also an Eco wash function, which suggests reduced consumption of electrical power.
| Problem | Possible cause |
|---|---|
| The programme will not start | Check the plug, fuse and circuit breakers of the mains supply |
| The water tap is turned off | |
| The dishwasher door is not fully dosed | |
| The water inlet filter or the machine filters are blocked | |
| Water remains inside the dishwasher at the end of the programme | The water drain hose is blocked or kinked |
| The filters are blocked | |
| The dishwasher stops in the middle of a programme | Power failure |
| Water inlet failure | |
| Programme is on standby | |
| Wash performance is of a low standard | Poor loading of dishes hinders wash performance. |
| Insuffident detergent added | |
| Inappropriate wash programme selected | |
| Spray arm blocked | |
| Filters clogged or incorrectly fitted | |
| Water drain pump blocked | |
| White stains on the dishes | Insuffident detergent added |
| Rinse aid setting is too low | |
| Insufficient dishwasher salt added | |
| Water softener setting is too low | |
| Salt compartment cap not completely closed | |
| The dishes are not completely dry at the end of the programme | A programme without a drying stage was selected |
| Rinse aid setting is too low | |
| Dishes unloaded too soon (allow time for drying) | |
| There are rust stains on the dishes | Different sets of cutlery should be kept separate |
| Too much salt (Water softener setting is too high) | |
| Salt compartment cap not completely closed | |
| Poor appliance earth (check mains electrical supply) | |
| The door is not opening or closing properly | Door tension not correctly adjusted for the decor door |
Many breakdowns of the dishwasher can be eliminated with simple actions. The problems are often associated with low voltage or reduced pressure in the water supply. Many breakdowns are caused by the fact that filters, grids, and holes are clogged in with food deposits. All these problems can be fixed without additional help which will bring the device back to normal operation.
CDA CW494 dishwasher troubleshooting
| Problem | Solution |
|---|---|
| The Dishwasher Does Not Start | - the plug is pushed into the socket correctly; |
| - the power is on in the house; | |
| - the door is closed properly; | |
| - the ON-OFF switch is on 'ON”; | |
| - the water supply is turned on. | |
| The Dishwasher Does Not Load Water | - the water is turned on and the hose is connected properly; |
| - the water supply to the house is on and has sufficient pressure; | |
| - the water supply hose is crimped or bent; | |
| - the filter for the water supply hose is clogged. | |
| The Dishes Are Not Clean | - the water is turned on and the hose is connected properly; |
| - the water supply to the house is on and has sufficient pressure; | |
| - the water supply hose is crimped or bent; | |
| - the filter for the water supply hose is clogged | |
| The Dishwasher Does Not Drain | - the drain hose is crimped or bent. |
| Lime Deposits or a White Film Form on the Dishes | - the lid to the salt container is closed properly; |
| - the rinse aid dosage is correct. |
Cda Dishwasher Wc140in Manuals
CDA WC370IN dishwasher troubleshooting
| Problem | Possible cause |
|---|---|
| The programme will not start | Check the plug, fuse and circuit breakers of the mains supply. |
| The water tap is turned off. | |
| The dishwasher door is not fully closed. | |
| The water inlet filter or the machine filters are blocked. | |
| Water remains inside the dishwasher at the end of a programme | The water drain hose is blocked or kinked. The filters are blocked. |
| The dishwasher stops in the middle of a programme | Power failure. |
| Water inlet failure. Programme is on standby. | |
| Wash performance is of a low standard | Poor loading of dishes hinders wash performance. Insufficient detergent added. Inappropriate wash programme selected. Spray arm is blocked. |
| Filters clogged or incorrectly fitted. | |
| Water drain pump is blocked. | |
| White stains on the dishes | Insufficient detergent added. |
| Rinse aid setting is too low. | |
| Insufficient dishwasher salt added. | |
| Water softener setting is too low. | |
| Salt compartment cap may not be completely closed. | |
| The dishes are not completely dry at the end of a programme | A programme without a drying stage was selected. |
| Rinse aid setting is too low. | |
| Dishes unloaded too soon (allow time for drying). | |
| There are rust stains on the dishes | Different sets of cutlery should be kept separate. Too much salt (water softener setting is too high). Salt compartment cap not completely closed. Poor appliance earth (check mains electrical supply). |
| The door is not opening or closing properly | Door tension not correctly adjusted for the decor door. |
CDA WF610BL, WC140in dishwasher troubleshooting
Cda Dishwasher Wc140in Manual User
| Error Code | Error description | Advice |
|---|---|---|
| F01 | Water leakage has been detected | • Turn off the dishwasher and disconnect the water supply |
| • Contact CDA Customer Care | ||
| F02 | The waste water cannot be discharged | • Drain hose is blocked |
| • The filters of your machine might be blocked | ||
| • Restart the dishwasher and cancel the programme | ||
| • If the error continues, contact CDA Customer Care | ||
| F03 | Continual fill error | • Contact CDA Customer Care |
| F04 | Faulty flow meter | |
| F05 | Inadequate water supply | • Make sure the water tap is fully open |
| • Close the water tap, separate the water inlet hose from the tap and clean the filter. | ||
| • Restart the dishwasher. | ||
| • If the error continues, contact CDA Customer Care | ||
| F06 | Faulty NTC | • Contact CDA Customer Care |
| F07 | Water temperature too high | |
| F08 | Heater error: Inadequate heat | |
| F09 | Diverter position problem | |
| F00 | Alarm is active against water overflow | |
| FE | Electronic card parameter faulty | |
| SE | Electronic card water hardness faulty | • Check the water hardness is set for your water supply |
| • If the error continues, contact CDA Customer Care | ||
| FA | Faulty turbidity sensor | • Contact CDA Customer Care |
Comments are closed.